.:: Tenby Lifeboat Website - New Boathouse Gallery 4 ::.

Last Update: 11/01

New Boathouse progress Gallery - 4
Page 1 / 2 / 3 / . / 5 / 6 / 7 / 8 / 9 / 10

The first piece of shuttering is lifted into place	The M2 delivers more shuttering	The second piece of shuttering is now in place
3rd piece of shuttering is lowered into place	A closeup of the end of the drill as it is lowered into the pile	Another shot of the drill bit, this time up on the deck of the rig
These 2 rows of piles are the ones that will eventually form the slipway	A view of the shuttering from the rig	A pile being prepared to have an extension welded on
The finished result	A pic taken from the current boathouse catwalk showing the whole site	The same pic as before but with the tide out. Note the slipway piles in the centre of the picture
A view of the site from Castle Hill taken early morning	The struts on this pile are there temporarliy to hold pile in place on rocks whilst concrete is poured to secure it	Fixing the struts into place. A concrete square will then be poured around the base of the pile
Another shot of the struts being secured. There will be 4 piles with these struts until the concrete is poured round them	Michael Jones from Taylor & Sons guiding a pile into place on the rocks	Workers looking at plans - making sure they are building it right!!!
The drilling rig leaves	Another shot of the rig on its way	An unusual shot taken looking through the arch at the top of the slope to the Castle Beach

Page 1 / 2 / 3 / . / 5 / 6 / 7 / 8 / 9 / 10

RNLI is a registered charity No 209603

© Tenby Lifeboat Website 1999 - 2003

Site designed by Ben James